These varnishes were developed specifically for Cernit Clay. Water- based varnish, transparent after drying. Resistant to plasticizers. Resistant to water (may become a bit white, but will become transparent again when dry. Very resistant to scratch. After baking the polymer clay, clean the surface thoroughly with alcohol. Apply 2-3 coats of varnish. Allow 1 hour between each application. When the varnish is dry to the touch, bake in a pre-heated oven for 15 min at 110C/230F for definitive hardness. 48 hours cooling is needed for maximum hardness. Clean equipment with water.

Softens and increases the flexibility of polymer clay, ceramic and mineral moldeling clays with out changing the color. Helps to recover old and hard polymer clays. Can also be used to make a liquid polymer clay of the desired color and to make coulis or (chewing gum) clay. Can also be used with acrylic paint to make it more flexible. For the pouring techinque, add up to 10% of Magic Mix to the paint

Baking glue for raw and baked polymer clay. Strong glue for raw and baked polymer clay. Must be baked (max 130c for max 30 min). Cernit glue is used to glue together your creations made of polymer clay. (raw, baked or a mixture of both). It can also be used to bond polymer clay to other porous or non-porous materials. Sticks effortlessly, a light pressure is sufficent to glue the different parts together without damaging them.